Commands Listed in Alphabetical Order
AUXIN:PROBE:I
NPUTMODE:CMOFFSET
? might return :AUXIN:PROBE:
INPUTMODE:CMOFFSET? “0.0000”
, indicating that the common mode offset
control is set to 0 V.
AUXIn:PRObe:INPUTMode:DMOFFSet
This command sets or returns the requested differential mode offset control of the
probe that is attached to the AUX In input.
Group
Vertical
Syntax
AUXIn:PRObe:INPUTMode:DMO FFSet
AUXIn:PRObe:INPUTMode:DMO FFSet?
Arguments
NR3 specifies the differential mode offset control.
Examples
AUXIN:PROBE:INPUTMODE:DMO FFSET 0.2 sets the differential mode offset
control to 0.2 V.
AUXIN:PROBE:INPUTMODE:DMO FFSET? might return :AUXIN:PROBE:
INPUTMODE:DMOFFSET? “0.0000”
, indicating that the differential mode offset
control is set to 0 V.
AUXIn:PRObe:RANge
This command controls or queries the set attenuation range of the probe on the
AUX In input.
Group
Vertical
Syntax
AUXIn:PRObe:RANge
{ATTEN1X|ATTEN1_25X|ATTEN 1_5X|ATTEN1_75X|ATTEN2X|ATTEN2_5X|
ATTEN3X|ATTEN3_5X|ATTEN4X |ATTEN4_5X|ATTEN5X|ATTEN5_5X|
ATTEN6X|ATTEN6_5X|ATTEN7X |ATTEN7_5X|ATTEN8X|ATTEN8_5X|
ATTEN9X|ATTEN9_5X|ATTEN10 X|ATTEN12_5X|ATTEN15X|ATTEN17_5X|
ATTEN20X|ATTEN25X|ATTEN30 X|ATTEN35X|ATTEN40X|ATTEN45X|
ATTEN50X|ATTEN55X|ATTEN60 X|ATTEN65X|ATTEN70X|ATTEN75X|
ATTEN80X|ATTEN85X|ATTEN90 X|ATTEN95X|ATTEN100X|ATTEN125X|
ATTEN150X|ATTEN175X|ATTEN 200X|ATTEN250X|ATTEN300X|
ATTEN350X|ATTEN400X|ATTEN 450X|ATTEN500X|ATTEN550X|
ATTEN600X|ATTEN650X|ATTEN 700X|ATTEN750X|ATTEN800X|
ATTEN850X|ATTEN900X|ATTEN 950X|ATTEN1000X}
AUXIn:PRObe:RANge?
2-94 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
