Tektronix MSO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:DDRMemory:CSActive
This command sets or queries whether the expected chip-select will be an active
HIGH or LOW.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:CSActive {HIGH |LOW}
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:CSActive?
Arguments
HIGH sets t he search to look for an active HIGH.
LOW sets the search to look for an active HIGH.
Examples
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:CSACTIVE HIGH sets the DDR
memory search chip select to an ac tive HIGH.
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:CSACTIVE? might return
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:CSACTIVE LOW indicating the
chip select is set to an active LOW.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel
This command sets or queries the DDR memory search chip-select level.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:CSLevel <NR3>
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:CSLevel?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode
Arguments
<NR3> is the amount of chip-select level in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:CSLEVEL 1.1 sets the chip-select
level for DDR memory searches to 1.1 volts.
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:CSLEVEL? might return
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:CSLEVEL 0.0000 indicating the
chip-select level for DDR memory sea rches is set to zero volts.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-433

Tektronix MSO70000 Series Specifications

General

Brand	Tektronix
Model	MSO70000 Series
Category	Test Equipment
Language	English