Tektronix MSO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
TRIGger:{A|B
}:EDGE:COUPling:CH<x>
This command sets or queries the type of coupling for the A or B trigger for the
specified channel. This command is equivalent to selecting A or B Trigger Setup
from the Trig
menu and choosing the setting from the Coupling drop-down list.
Group
Trigger
Syntax
TRIGger:{A|B}:EDGE:CO
UPling:CH<x>
{AC|DC|HFRej|LFRej|NOISEre j}
TRIGger:{A|B}:EDGE:COUPlin g:CH<x>?
Related Commands
TRIGger:{A|B}:EDGE:COUPling
Arguments
AC selects AC trigger coupling.
DC selects DC trigger coupling.
HFRej selects high frequency low sensitivity.
LFRej selects low frequency low sensitivity.
NOISErej selects DC low sensitivity.
Examples
TRIGGER:B:EDGE:COUPLING:CH 1 DC selects DC for the B trigger coupling
of Channel 1.
TRIGGER:B:EDGE:COUPLING:CH 1? might return
:TRIGGER:B:EDGE:COUPLING:C H1 LFREJ for the B trigger coupling.
TRIGger:{A|B}:EDGE:SLOpe
This command sets or queries the slope for the edge trigger. This command is
equivalent to selecting Event Trigger Setup from the Trig menu and then choosing
the desired Slope.
Group
Trigger
Syntax
TRIGger:{A|B}:EDGE:SLOpe {RISe|FALL|EIThe r}
TRIGger:{A|B}:EDGE:SLOpe?
Related Commands
TRIGger:{A|B}:EDGE:SOUrc
e, TRIGger:{A|B}:EDGE:COUPling,
TRIGger:{A|B}:EDGE?, TRIGger:B:STATE
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-499

Tektronix MSO70000 Series Specifications

General

Brand	Tektronix
Model	MSO70000 Series
Category	Test Equipment
Language	English