Commands Listed in Alphabetical Order
MEANSTDdev tur
ns on statistics and displays the mean and standard deviation
of each measurement.
Examples
MEASUREMENT:STATISTICS:MO DE OFF turns off statistic measurements.
MEASUREMENT:STATISTICS:MO DE? might return
:MEASUREMENT:STATISTICS:M ODE ALL, indicating that measurement statistics
are turned on and a
ll statistics are being displayed for eac h measurement.
MEASUrement:STATIstics:WEIghting
This command sets or queries the time constant for mean and standard deviation
statistical ac
cumulations. This command is equivalent to selecting Measurement
Setup from the Measure menu, clicking the Statistics button and entering the
desired Weight n= value.
Group
Measurement
Syntax
MEASUrement:STATIstics:WE Ighting <NR1>
MEASUrement:STATIstics:WE Ighting?
Related Commands
MEASUrement:STATIstics:MODe
Arguments
<NR1> is the time constant for the mean and standard deviation statistical
accumulations.
Examples
MEASUREMENT:STATISTICS:WE IGHTING 4 sets statistical weighting to 4.
MEASUREMENT:STATISTICS:WE IGHTING? might return
:MEASUREMENT:STATISTICS:W EIGHTING 4, indicating that
measurement statistics weighting is currently set to 4.
NEWpass(NoQueryForm)
This c ommand (no query form) changes the password that enables access to
password protected data. The PASSWord command must be successfully executed
before using this command or an execution error will be generated.
Group
Miscellaneous
2-410 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
