Commands Listed in Alphabetical Order
SEARCH:SEARCH
<x>:TRIGger:A:GLItch:POLarit y:CH<x>?
Arguments
EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive glitch polarity.
Examples
SSEARCH:SEAR CH1:TRIGGER:A:G LITCH:POLARITY:C H2 NEGATIVE
specifies that the Channel 2 glitch polarity must be negative for search 1.
SEARCH:SEARCH1:TRIGGER:A:G LITCH:POLARITY:CH1? might return
:SEARCH:SEARCH1:TRIGGER:A: GLITCH:POLARITY:CH1 NEGAT IVE,
indicating that the Channel 1 glitch polarity for search 1 is negative.
SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MAT H<x>
This command sets or queries the polarity for a g
litch trigger search to d etermine
where to place a mark. <x> is the search number or math waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :GLItch:POLarity:MATH<x>
{EITher|NEGAtive|POSITIVe}
SEARCH:SEARCH<x>:TRIGger:A :GLItch:POLarity:MATH<x>?
Arguments
EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive
glitch polarity.
Examples
SEARCH:SEARCH1:TRIGGER:A:G LITCH:POLARITY:MATH2 NEGA TIVE
specifies that the Math 2 waveform glitch polarity must be negative for search 1.
SEARCH:SEARCH1:TRIGGER:A:G LITCH:POLARITY:MATH1? might return
:SEARCH:SEARCH1:TRIGGER:A: GLITCH:POLARITY:MATH1 POS ITIVE,
indicating that the Math 1 waveform glitch polarity for search 1 is positive.
SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>
This command sets or queries the polarity for a glitch trigger search to determine
where to place a mark. <x> is the search number or reference w aveform n
umber.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-445
To Next Page
Loading...
Need help?
General
