Tektronix MSO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
HARDCopy:PORT
{FILE|PRINTER}
HARDCopy:PORT?
Related Commands
HARDCopy, HARDCo
py:FILEName
Arguments
FILE argument specifies that the hard copy is stored in the file specified in the
HARDCopy:FILEName
command.
PRINTER argument specifies that the hard copy is sent to the printer specified
in the Print dialog
box.
Examples
HARDCOPY:PORT FILE specifies that the hard copy is stored in the file specified
in the HARDCopy:FILE
Name command.
HARDCOPY:PORT? might return :HARDCOPY:PORT FILE indicating that hard
copies are sent to th
especified file.
The following commands sequence lets you to specify an inksaver data hard
copy is stored in a fi
le:
*RST
HARDCOPY:PORT FILE
HARDCOPY:PALETTE INKSAVER
HARDCOPY:FILENAME “FILE_INKSAVER”
HARDCOPY START
The following commands sequence lets you to specify a color data hard copy
is stored in a file:
HARDCOPY:PALE
TTE COLOR
HARDCOPY:FILENAME :FILE COLOR”
HARDCOPY START
Both files will be the same since they are directed to a file. If they were directed to
a printer then the printouts would be different.
HARDCopy:R
EADOuts
This command sets or queries the area on a hardcopy where the readout appear.
This command is equivalent to selecting Page Setup from the File menu and
setting th
e Readouts Below Graticule in the control window.
Group
Hardcopy
Syntax
HARDCopy:READOuts {OFFGRAticule|ONG RAticule}
HARDCopy:READOuts?
2-228 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix MSO70000 Series Specifications

General

Brand	Tektronix
Model	MSO70000 Series
Category	Test Equipment
Language	English