Commands Listed in Alphabetical Order
Syntax
HORizontal:FA
STframe:COUNt <NR1>
HORizontal:FASTframe:COUNt ?
Related Commands
HORizontal:MODE:RECOrdlength
Arguments
<NR1> indicates the number of frames to acquire.
Examples
HORIZONTAL:FASTFRAME:COUNT 2 sets up FastFrame mode to acquire two
frames (segments) of data.
HORIZONTAL:FASTFRAME:COUNT ? might return
:HORIZONTAL:FASTFRAME:COUN T 4, indicating that FastFrame mode is
currently set to acquire 4 fr ames of da
ta.
HORizontal:FASTframe:MAXFRames? (Query Only)
This query only command returns the maximum number of FastFrame frames
which can be acquired at the current frame length.
Group
Horizontal
Syntax
HORizontal:FASTframe:MAXFR ames?
Related Commands
Examples
HORIZONTAL:FASTFRAME:MAXFR AMES? might return HORIZONTAL:
FASTFRAME:MAXFRAMES 3
, indicating that the maximum number of FastFrame
frames which can be acquired at the current frame length is 3.
HORizontal:FASTframe:MULtipleframes:FRAMESTart:<wfm>
This command sets or queries the start frame number on the specified waveform
for the FastFrame multiple frames feature. Valid waveforms include CH<x>,
MATH<x>, and REF<x>. The value of x can be an integer ranging from 1
through 4. The multiple frames feature supports displaying multiple frames in an
overlaid manner.
Group
Horizontal
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-241
To Next Page
Loading...
Need help?
General
