Tektronix MSO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :RUNT:THReshold:LOW:CH<x> <NR3>
SEARCH:SEARCH<x>:TRIGger:A :RUNT:THReshold:LOW:CH<x>?
Arguments
<NR3> specifies the LOW threshold in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A:R UNT:THRESHOLD:LOW:CH2 0.1 0 sets the
Channel 2 LOW runt trigger threshold for search 1 to 100 mV.
SEARCH:SEARCH1:TRIGGER:A:R UNT:THRESHOLD:LOW:CH1? might return
:SEARCH:SEARCH1:TRIGGER:A: RUNT:THRESHOLD:LOW:CH1 80 0.0000E-3,
indicating the Channel 1 runt trigger LOW threshold for search 1 is set to 800 mV.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>
This command sets or queries the math waveform threshold LOW level for a runt
trigger search to determine where to place a mark.
<x> is the search number or
the math waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :RUNT:THReshold:LOW:MATH<x> <NR3>
SEARCH:SEARCH<x>:TRIGger:A :RUNT:THReshold:LOW:MATH<x>?
Arguments
<NR3> specifies the LOW threshold level.
Examples
SEARCH:SEARCH1:TRIGGER:A:R UNT:T
HRESHOLD:LOW:MATH2 0.10
, sets the
Math 2 waveform runt trigger LOW threshold for search 1 to 100 mV.
SEARCH:SEARCH1:TRIGGER:A:R UNT
:THRESHOLD:LOW:MATH1?
might
return
:SEARCH:SEARCH1:TRIGGER:A :RUNT:THRESHOLD:LOW:MATH1
800.0000E-3
, indicating the Math 1 waveform runt trigger LOW threshold
for search 1 is set to 800 mV.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>
This command sets or returns the reference waveform threshold LOW level for a
runt trigger search to determi
ne where to place a mark.
<x> is the search number
or the reference waveform number.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-459

Tektronix MSO70000 Series Specifications

General

Brand	Tektronix
Model	MSO70000 Series
Category	Test Equipment
Language	English