UTILITY
THS710A, THS720A, THS730A & THS720P User Manual
3–63
Config System
S
PE or
L
System Config
ME
E
Tek Secure Erase
Memory
Version
OK Erase
Setup/Data
Key Points
Tek Secure. If you have acquired confidential data, you may want to
execute Tek Secure before you return the TekScope instrument to
general use. Executing Tek Secure accomplishes the following tasks:
H Replaces all waveforms (oscilloscope and data logger) in all
reference memories with zero sample values
H Replaces the current front-panel setup and all stored setups with
the factory setup
H Calculates the checksums of all waveform memory and setup
memory locations to verify successful completion of waveform
and setup erasure
H Displays a confirmation or warning message if the checksum
calculation is successful or unsuccessful
To Next Page
Loading...
