Appendix A: Specifications
THS710A, THS720A, THS730A & THS720P User Manual
A–7
Oscilloscope Specifications (Cont.)
External Trigger
External Trigger,
Maximum Input Voltage
600 V
RMS
CAT II, 300 V
RMS
CAT III (refer to page A–19)
External Trigger
Coupling
DC only
External Trigger Levels +0.2 V or +2 V, selectable
External Trigger Sensi-
tivity
500 mV
p-p
from DC to 1 MHz, increasing to 1 V
p-p
at 5 MHz, with
signal centered at selected trigger level.
TTL compatible using +2 V trigger level.
Measurements
Cursors
Voltage difference between cursors (DV)
Time difference between cursors (DT)
Reciprocal of DT in Hertz (1/DT)
Phase difference between cursors (DDegrees)
Automated
Measurements
Amplitude, Burst Width, Cycle Mean, Cycle RMS, Fall Time,
Frequency, High, Low, Max, Mean, Min, Negative Duty Cycle,
Negative Overshoot, Negative Width, Pk – Pk, Period, Positive
Duty Cycle, Positive Overshoot, Positive Width, Rise Time, and
RMS
To Next Page
Loading...
