1-00-04
100%
REPLACEMENT PARTS.
It is recommended that the following parts be replaced 100 percent during the major overhaul
of any Teledyne Continental Motor's aircraft engine regardless of conditions.
Hydraulic Lifters
Rubber Hoses
Oil Seals
Gaskets and Packings
Circlips, Lock Plates
&
Retaining Rings
Piston Rings
Valve Keepers
Bearings- Main and Rod
Rubber Drive Bushings
Exhaust Valves
Piston Pins
Rotocoils
Needle Bearings
Woodruff Keys
Rocker Arm
&
Conn. Rod Bushings
All Nuts
-
Self-locking
Cotter Pins
Pistons
Springs
-
Oil Pressure
Thrust Washers
Generator Belts
Spring
-
Starter Clutch
Harnesses
Oil Suction Screens with Small Openings
Spark Plugs
Washers
-
Locking
Washers
-
Plain
Exhaust Clamps, Turbo to Tailpipe
Counterweight Bushings
Intake Guide Seals
All 10-346, 10-360,
LTSIO/
TSIO-360, 0-470, 10-470
TSIO-470, GIO-470, and
6-285 Models
All Models
All Models
All Models
All Models
All models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
All Models
Special Note:
If for any reason lifters are removed for inspection before the overhaul period has been
reached, they must be placed back in the same location from which they were removed.
CRANKCASES ALL MODELS
Re-assembly with configuration as per Service Bulletin M76-10 and M83-10 Rev.
1
or current
revision as applicable at the time major overhaul is recommended.
To Next Page
Loading...
Need help?
General
