Aligna
®
4D User Manual
8 / 84
Detectors) with various types of sensors (wavelength, beam diameter, resolution, dimensions,
QUAD detectors, duo/tetra lateral PSDs, or CCD/CMOS cameras) are available.
In some applications a 2D stabilization (instead of 4D) may be suitable. In this case only one
2D scanner BamScan 2D is necessary. (This reduction, however, can be more critical and
takes more effort in positioning the PSD. Please refer to chapter “2D or 4D stabilization”!)
Aligna
®
4D electronics 4D detector PSD 4D e
BeamScan2D with different mirror shapes, 1-inch and square bodies
Elliptical mirror 22 x 32 mm, (5mm thick), fitting into std 1-inch mirror holder
To Next Page
Loading...