Terumo CDI OneView - Page 128

B-13
System Specifications
Test Specifications for Enclosure Port Immunity to RF Wireless
Communication Equipment
Test Frequency
(MHz)
Band
a)
(MHz)
Service
a)
Modulation
IMMUNITY
TEST LEVEL
(V/m)
385 380 to 390 TETRA 400
Pulse modulation
18 Hz
27
450 430 to 470
GMRS 460,
FRS 460
FM
± 5 kHz deviation
1 kHz sine
28
710
745
780
704 to 787 LTE Band 13, 17
Pulse modulation
217 Hz
9
810
870
930
800 to 960
GSM 800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse modulation
18 Hz
28
1,720
1,845
1,970
1,770 to 1,990
GSM 1800;
CDMA 1900;
GSM 1900;
DECT; LTE Band
1, 3, 4, 25;
UMTS
Pulse modulation
217 Hz
28
2,450 2,400 to 2,570
Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450,
LTE Band 7
Pulse modulation
217 Hz
28
5,240
5,500
5,785
5,100 to 5,800
WLAN
802.11 a/n
Pulse modulation
217 Hz
9
Recommended RF Separation DistanceRecommended RF Separation Distance
The CDI OneView System is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The user can prevent electromagnetic
interference by maintaining a minimum distance of 30 cm (12 inches) between
portable and mobile RF communications equipment and any part of the CDI OneView
System.