D-3
Symbols Glossary
Symbol Title Description Source
Non-ionizing radiation Non-ionizing radiation. IEC 60417-5140
Catalogue Number
Indicates the manufacturer’s catalogue
number so that the medical device can
be identied.
ISO 15223-1-5.1.6
Authorized
representative in the
European Community
Indicates the Authorized
representative in the European
Community.
ISO 15223-1-5.1.2
ETL Mark
Listed by Intertek with respect to
electrical shock, re, and mechanical
hazards in accordance with IEC
60601-1:2005/2012 and CAN/CSA
C22.2 No. 60601-1.
Intertek
WEEE
is standard applies to Electronic
equipment in accordance with article
11(12) of Directive 2002/96/EC.
Directive 2002/96/
EC
Prescription only
Caution: Federal (U.S.A.) law restricts
this device to sale, distribution and
use by or on the order of a physician.
21 CFR 801.109
Batch code
Indicates the manufacturer’s batch
code so that the batch or lot can be
identied.
ISO 15223-1-5.1.5
Importer
Indicates the entity importing the
medical device into the locale.
ISO 15223-1:2021
(5.1.8)
Medical device Indicates the item is a medical device.
ISO 15223-1:2021
(5.7.7)
Use-by date
Indicates the date aer which the
medical device is not to be used.
ISO 15223-1-5.1.4
STERILIZE
2
Do Not Resterilize
To indicate that the device should not
be re-sterilized aer it once has been
sterilized.
ISO 7000-2608
Do Not Use if Package
is Damaged
To indicate that the device must not
be used if the package holding the
device is damaged.
ISO 7000-2606
Fluid Path
On medical devices: to indicate the
ow path for uids.
ISO 7000-2722
Sterilized using
irradiation
To indicate that the device is provided
sterile and has been sterilized using
irradiation.
ISO 7000-2502
Sterilized using
ethylene oxide
To indicate that the device is provided
sterile and has been sterilized using
ethylene oxide.
ISO 7000-2501
Non-Pyrogenic
On medical devices: to indicate that
the product is non-pyrogenic.
ISO 7000-2724
Hg
Mercury; Chemical
Symbol
Mercury is a chemical element. 2006/66/EC
REF
REPEC
LOT
To Next Page
Loading...