TESA MICRO-HITE - 6 INSTALLATION; 6.2 Unpacking & installation

Instruction manual for MH & MH+M
30
6 INSTALLATION
6.1 Packaging
Each MICRO-HITE or MICRO-HITE+M instrument is delivered in packaging developed to
protect it from shocks and corrosion.
Only transport the height gauge in this packaging. Any other transport using
unofficial packaging is not recommended and will not be covered by TESA in
case of dispute.
6.2 Unpacking &
installation
1. Bring the pallet as close as possible from the installation area
2. Remove from pallet, accessories and panel boxes as well as documents cardboard folder.
3. Remove power supply and cables from the box.
4. Remove the masterpiece from the box and its plastic bag. Clean its base before placing it
on the granite table.