TESA MICRO-HITE - 9.3 Measurement parameters

Instruction manual for MH & MH+M
49
Managing the air cushion
Managing the keyboard’s backlight
9.3 Measurement
parameters
Definition of options
Definition of the resolution
• Metric: 0.00, 0.000, 0.0000
• Imperial: .000, .0000, .00000
Managing the unit
• Metric
• Imperial
Definition of the angle unit
• DD:MM:SS
• Degree
• Radian
Managing the temperature unit
• Celsius
• Fahrenheit
• Size of the master piece
• Height of the automatic positioning of the probe when starting the probe
calibration’s process (for MH+M)
Retract distance after probe hit (for MH+M)
Speed (for MH+M)
• Fast displacement speed (for MH+M): 30, 50, 70, 90 mm/s
• Probing speed (for MH+M): 7, 14 mm/s
The technical specifications announced for a MICRO-
HITE+M were calculated with a probing speed of 7mm/s.
Any variation in the probing speed in comparison with the
latter may also lead to variations in the precision of the
instrument.
Waiting time when running a program (for MH+M):
• before moving to another measurement zone
• before the measurement
If the distance between the current and the next measurement area is
close enough, the software will activate the countdown until the next
measurement only once.