Tomey UD-8000 User Manual

■ 3-126
b) Selecting specific axial length data to be used for calculating IOL power
The average value is normally adopted for the measurement data to be
used in calculating the IOL power, but specific data can also be selected.
1) Use the “selection cursor movement” buttons (1) to move the selection
cursor (2) to the data which is to be used in calculating the IOL power. To
use the average value for IOL power calculation, move the selection cursor
(2) to the average axial length data at the bottom.
2) When the “Select” button (3) is touched, it is selected as the data to be
used in calculating the IOL power, and a “*” appears on the left of the data.
3-90
(Fig. 1)
(2)
(1)
(3)

Tomey UD-8000 Specifications

General

Brand	Tomey
Model	UD-8000
Category	Medical Equipment
Language	English