1-5
■
■
If any failure occurs in the instrument, immediately stop operation,
indicate the failure in the instrument, and contact our local distributor for
repairs.
- Do not modify the instrument. Doing so may cause electric shock or failure of
the instrument. There is a high-voltage section in the instrument. Touching this
section will result in death or serious injuries.
- Disconnect the power cord from the outlet when replacing fuses. Otherwise,
you may get an electric shock, resulting in death or serious injuries.
- Use the power cord and fuses provided with the instrument or specified by
Tomey to ensure safety. Also, do not use the accessories provided with the
instrument for other equipment.
- Conduct regular inspections of the instrument and components.
- When any instrument failure occurs, indicate the failure, and contact our local
distributor to request inspection and repair. Do not attempt to repair the
instrument yourself.
- When the instrument is not used for 1 month or longer, check that the
instrument is operating correctly and safely before starting operation. Refer to
“5.3 Inspection” in this manual for the relevant procedures.
To Next Page
Loading...
Need help?
General
