Tomey UD-8000 - Page 210

■ 3-154
b) Method for setting converted sonic velocity and bias value
Select how to display the bias value from the following two options.
■ Percentage bias
Converts the actual measurement using the preset bias rate
(percentage) and displays the result.
■ Plus/minus bias
Adds/subtracts the preset correction value to/from the actual
measurement, and displays the result.
1) Touch the “Change Setting” button (1) on the setting menu screen to
display the screen for setting converted sonic velocity and bias value (Fig.
2).
(Fig. 2)
(2)
(3)
(4)
(7)
(6) (5)
3-112
(Fig. 1)
(1)
3-111