■
1-8
[Gray scale] : Indicates the range of gradation values to be measured in
images represented in shades from white to black.
[Gain] : Adjust amplification, brightness of images, and amplitude
of waveforms.
[Gate] : Specifies the range of waveforms to be detected.
[Scan mode] : Allows you to select basic mode or high sensitivity mode.
High sensitivity mode is a function which reduces the
noise of received ultrasonic signals and enhances the
sensitivity for images.
[Smoothing] : A function which enhances the quality of images by
smoothing individual connections in the screen and
reducing noises produced irregularly.
[Measurement point] : Indicates the point where corneal thickness is measured
by diameters and angles.
[Touch panel] : Allows you to make various settings, etc. by directly
touching the monitor.
[Harmonic] : Image composition method for ultrasound diagnosis which
uses harmonic components of ultrasonic waves.
[Bias value] : Value obtained by converting actual measurements using
a specified percentage or correction value
[fitting formula] : Converts axial length measurement data in light
interference method to that in ultrasonic method.
[Vector A mode] : A function which indicates the direction of ultrasonic
waves transmission and displays their A-mode waveform.
[Real time] : Status where ultrasound waves are transmitted
[∫] : Displays the measuremen
t data calculated using the
integral calculus function.
To Next Page
Loading...
Need help?
General
