3-217
■
[Connection Setting: DNS]
1) When DHCP is selected, “DNS” key (1) is displayed. When the “DNS” key
is pressed, Host IP address changes to Host Computer Name (2), allowing
you to specify the host computer by entering the computer name (Full
name). A DNS server must be running in the LAN environment to enable
connection using the DNS.
2) When configuration with DNS is successful, “DNS OK” (3) appears. When
connection using DNS fails, for example, the host computer name is not
recognized, the message does not appear.
(1)
(2)
(Fig. 3)
(3)
3-145
To Next Page
Loading...
Need help?
General
