3-229
■
j) Data Management
■
When the memory card is initialized, all data in the
memory card is cleared and cannot be restored.
Carefully check the data before doing so.
■
When patient information and measurement data exist,
the data in the USB flash memory cannot be arranged.
Delete all patient information and measurement data
before performing data arrangement.
(1) USB Memory Management
Perform this operation with a USB flash memory connected with the instrument.
Arrangement: Opens the ID list display screen.
Format: The confirmation screen appears. Touch the “OK” button to initialize
the USB flash memory.
(2) AL-4000 Data Management (Axial length measurement display function/Corneal thickness
measurement display function/A-mode diagnosis function)
Perform this operation when communication with AL-4000 is available.
Displays the list of data in the AL-4000.
(1)
(2)
3-155
To Next Page
Loading...
