2-17
■
b) Edit screen
(1) Waveforms monitor
Displays the measured waveform and memory number.
(2) Measurement data display
Measurement data of the axial length, anterior chamber depth, and crystal lens thickness, and
their averages are listed.
The following marks are assigned to the measurement data.
“*”: Data used for calculating IOL
“L”: Longest axial length
“S”: Shortest axial length
“C”: Callipered data
“a”: Data with low reliability
Touching any data focuses the data.
(3) Gate/Caliper tool
Displays the gate tool or caliper tool.
2-20
(1)
(2)
(3)
(5) (6)
(4)
(7)
To Next Page
Loading...
Need help?
General
