■
3-10
g) Connecting an external digital printer
■
Use only specified video printers and cables. Use a
video signal cable or remote cable to connect this
instrument to a device conforming to IEC60601-1 or JIS
T 0601-1 or conforming to IEC60950-1 and with a power
source isolated by an insulated transformer.
[Video printer]
1) Insert the cable plug A(1) of the USB cable into the USB connector (2) on
the back of the main unit in the correct orientation.
2) Connect the other cable plug B of the USB cable to a video printer.
Follow the instruction manual of the video printer for details on how to
connect the printer.
[Pict Bridge printer]
3) Plug the cable plug mini B (3) of the USB cable into the mini USB connector
(4) on the back of the main unit in the correct orientation.
4) Connect the other cable plug A or mini A of the USB cable to a video printer.
Follow the instruction manual of the video printer for details on how to
connect the printer.
(2)
(4)
(1)
(3)
(Fig. 1)
3-11
3-12
To Next Page
Loading...
