Tomey UD-8000 User Manual

■ 3-40
2) Select a probe angle button shown in the lower left of the monitor.
The selected angle is shown by the probe angle mark (3) in the bottom left
of the monitor. “N” means nasal (nose) and “T” means temporal (ear).
3) Touching the arrow button (4) in the center rotates the probe angle mark in
the in the clockwise direction as shown below.
4) Selecting the “OFF” button hides the probe angle mark (3).
5) The probe angle window closes when the “Close” button is touched.
<Relationship between the displayed image and the probe angle>
The B-mode probe has a mark (1) that indicates the scanning direction. The
relationship between the scan direction mark and the image captured by the
probe is as shown in the following table:
3-37
(Fig. 3)
3-38
(1)
(1)

Tomey UD-8000 Specifications

General

Brand	Tomey
Model	UD-8000
Category	Medical Equipment
Language	English