Topcon ASC-10 - Page 20

2.1. Setting up a new implement
4
rigid
pivoted (tow behind)
front mount
double pivoted (tow between)
A message displays stating that the console will restart once the
implement has been created.
A default name for the implement is displayed.
Note: It is highly recommended that items are named in a
thoughtful and structured way to allow easy use in future seasons.
4. To change the default name, select IMPLEMENT NAME and
enter the new name, then confirm.
The New Implement Setup wizard displays.
5. Select IMPLEMENT CONTROL, select Section Control Only
or Section Control and Rate Control, confirm and select next.
6. Select ECU TYPE, select ASC-10, confirm and select next.
Note: The Sprayer Controller interface described in Chapters 3
and 4 of this manual is only used to control sprayers equipped
with the Topcon ASC-10 ECUs.
If ISOBUS ECU is chosen, functionality will depend on the
ISOBUS unit connected. The ISOBUS ECU can be operated via
the Universal Terminal feature of the console. Please refer to the
ISOBUS ECU documentation.
7. Select IMPLEMENT FUNCTION, select Sprayer, confirm and
select next.