5.6. Setting area counters
54
Reset job area counters
This option is only applicable if area counters per job is enabled.
l Never: The area counters must be reset manually, or they will
continue to accumulate data.
l Prompt: When a job is erased you will be asked if area counters
should be reset.
l Auto: Creating a new job or erasing a job will automatically reset
the area counters.
To use area counters:
1. Select Area Counters on the toolbar to the right of the screen.
Note: A separate icon for job and implement area counters is
shown if both are enabled.
To Next Page
Loading...
