Topcon DL-501 User Manual

61
14. CALCULATION FUNCTIONS
• When calculating closure for a leveling link/
loop comprising multiple connected routes,
set the measurement direction. This direction
is set by specifying the start point for each
route in the link/loop.
Align the cursor with "Start pt" and press
{}.
• Align the cursor with the point you wish to use
as the start point and press {}. The
previous screen is restored.
4. Press [OK] to add the selected route to the
selected route list.
• To add more routes, align the cursor with a
blank row and press {}. The route
selection screen is re-displayed.

• To delete a route from the selected route list,
align the cursor with that route in the selected
route list and press [DEL] on page 2.
OK
Route001
Route setting
:R001
Start pt
:Route-01-ST0000
LIST
End pt
:Route-01-ST0004
OK
Route-01-ST0000
Route-01-ST0004
OK
Route001
Route setting
:R001
Start pt
:Route-01-ST0004
LIST
001 R001
002
LAST
TOP
OK
P1
OK
Route002
Route setting
:R002
Start pt
:Route-02-ST0000
LIST
001 R001
002
P2
DEL
DL-501_E.book 61 ページ ２０１５年９月１７日 木曜日 午後１時２１分

Topcon DL-501 Specifications

General

Brand	Topcon
Model	DL-501
Category	Laser Level
Language	English