P/N 7010-1004
Chapter 5
5-1
Receiver and File
Maintenance
If post-processing the data after completing a survey, the data in the
receiver’s memory needs to download to a computer. Downloading
and deleting files prepares the receiver’s memory for the next survey.
Occasionally, the receiver’s NVRAM may need to be cleared to
eliminate communication or tracking problems.
As project expectations expand, the receiver’s OAF may need to be
updated to provide expanded operation and functionality. The various
boards inside the receiver (GPS, power, modem, and Bluetooth)
require firmware to properly operate and provide appropriate
functionality. As TPS releases firmware updates, loading these
updates into the receiver will ensure the receiver operates at its full
potential.
Downloading Files to a
Computer
After completing a survey, download data files to a computer for
storage, post-processing, or backup. Also, the receiver memory holds
a finite amount of files and information, so downloading data
prevents files from being lost. TRU and Topcon Link both provide
file managers to download files from the receiver to a computer, and
to delete files from the receiver. TRU and Topcon Link are both free
utilities available through a Topcon Dealer or the Topcon website
(www.topconpositioning.com).
To Next Page
Loading...
Need help?
General
