Topcon GR-5 - Deleting Files from the Receiver’s SDHC Card Using PC-CDU

Deleting Files from the Receiver’s SDHC Card Using PC-
P/N 7010-1004
5-7
Deleting Files from the
Receiver’s SDHC Card Using
PC-CDU
Use the following steps to delete files from the receiver.
1. Connect the receiver and computer. See “Connecting the
Receiver and a Computer” on page 2-21 for this procedure.
2. On the Connection Parameters dialog box, enable RTS/CTS
handshaking (Figure 5-9).
Figure 5-9. Connection Parameters – RTS/CTS Handshaking
3. Click FileFile Manager and select the file(s) to delete on the
Download files tab (Figure 5-10 on page 5-8).
To select multiple files, hold down the shift key and click on non-
sequential files to select several files at once; or hold down the
Ctrl key and click on individual files.
4. Click Delete (Figure 5-10 on page 5-8).
5. Click Yes at the delete files confirmation dialog box. PC-CDU
deletes the selected files.
6. Click Exit on the File Manager screen.
7. Continue with other operations. Or Click FileDisconnect, then
FileExit to quit PC-CDU.