Introduction
GR-5 Operator’s Manual
1-10
• Detailed control over numerous receiver settings, such as mask
angles, static/dynamic tracking modes, startup behavior, etc.
• Setting different survey parameters
• High frequency measurement (up to 100 Hz) and position output
rates
• Static or dynamic modes
GR-5 Features
The GR-5 receiver’s advanced design reduces the number of cables
required for operation, allowing for more reliable and efficient
surveying.
The GR-5 is a 216-channel GNSS receiver with two data ports, a
power port, a multi-system GNSS board, and a radio modem
communications board, an interface for controlling and viewing data
logging, and also includes:
• Two external, detachable batteries
• USB and Serial data ports
• External memory card slot
• Internal radio modem
• Bluetooth® wireless technology module
• Interface for controlling and viewing data logging through
MINTER display
• Optional GSM/GPRS module.
• SIM card slot
MINTER
The MINTER is the receiver’s LED display panel used to display and
control data input and output (Figure 1-2).
The Battery LEDs display the power status for each battery:
• Green – indicates greater than 85% charge.
• Orange – indicates an intermediate charge.
To Next Page
Loading...
