InstallingtheHood
1.Installallthehoodcomponentsthatwereremoved(Figure215).
Note:Iftheintakescreenwasremovedfromthehood,ensurethatthehood
support,sealplateareattachedtothehoodbeforeyouinstallthescreen.
2.Attachthescreentothehoodwiththe26plasticplugs.
3.Checktheconditionofallthesealsontheframeandhood.Replacethe
damagedormissingseals.
4.Checkthatnogapsexistbetweenthehoodcomponentsandthemachine
frame.
Note:Ifnecessary,sealthegapswithsiliconesealant.
5.Positionthehoodtothemachineandslidethehoodsupportontotheframe
rods.
6.Securethehoodtotheframerodswiththehairpincotter(item17inFigure
215).
7.Closethehoodandlatchit.
Groundsmaster7210
Page6–41
Chassis:ServiceandRepairs
16222SLRevC
To Next Page
Loading...
