Toro Groundsmaster 7210 - Releasing Pressure from the Hydraulic System

ReleasingPressurefromtheHydraulicSystem
Releaseallthepressureinthehydraulicsystembeforeyouworkonthehydraulic
system.
•Releasethehydraulicpressurefromthetractioncircuitasfollows:
Note:Ifyouparkthemachineonaninclineorslope,thepressurein
thetractioncircuitdoesnotrelease.
1.Movethemachinetoalevelsurface.
2.Lowerthecuttingdeck(orimplement).
3.Shutofftheengine.
4.TurnthekeyswitchtotheOFFpositionandallowtheenginetostop.
•Releasethehydraulicpressurefromtheliftcircuitasfollows:
1.Fullylowerthecuttingdeck(orimplement)ontothesolidblocks.
2.TurnthekeyswitchtotheOFFpositionandallowtheenginetostop.
3.Afterloweringthecuttingdeck,ensurethattheliftcylinderdoesnot
supportthecuttingdeck(orimplement).
Groundsmaster7210
Page4–11
HydraulicSystem:GeneralInformation
16222SLRevC