Torso Electronics S-4 - Timing Rate Options

144
The S-4 Sculpting Sampler - Ofcial Manual
145
The S-4 Sculpting Sampler - Ofcial Manual
9.3 Timing Rate Options
Some functions operate on a timing scale i.e. all rates and delay time.
These note divisions are shown generally below. The rates available
include triplet and dotted values.
Mode Rate Division Options Comments
Straight 8/1, 4/1, 2/1, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 Division Values
Triplet 8/1 T, 4/1 T, 2/1 T, 1/1 T, 1/2 T, 1/4 T, 1/8 T, 1/16 T, 1/32 T, 1/64 T Division Values
Dotted 8/1 D, 4/1 D, 2/1 D, 1/1 D, 1/2 D, 1/4 D, 1/8 D, 1/16 D, 1/32 D, 1/64 D Division Values
Free 1 - 50Hz, Adjust in Hz Adjust Freely
Appendix
9
Appendix
9
Currently the S-4 can modulate all of the adjustable parameters found in
the audio devices, tracks and the main mix page. Note that the amount of
modulation can be applied unipolar or bipolar. in [MOD] mode change mode
adjustment using [CTRL] + Parameter.
Device Model Destination
Deform Noise Decay
Deform Noise Color
Deform Wet
Vast Delay
Vast Time
Vast Reverb
Vast Size
Vast Feedback
Vast Spread
Vast Damp
Vast Decay
Track Send 1
Track Send 2
Track Send 3
Track Send 4
Device Model Destination
Mix Level 1
Mix Level 2
Mix Level 3
Mix Level 4
Mix Filter 1
Mix Filter 2
Mix Filter 3
Mix Filter 4
Mix Pan 1
Mix Pan 2
Mix Pan 3
Mix Pan 4
Mix Compress
Mix Main
NOTES
NOTES