Toshiba E-STUDIO2008A - Page 467

6
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 83
[ 1-4 ] Paper exit speed settings
(1) Check the number of LED blinking times.
The default settings of the number of LED blinking times in the mode setting, media type and
paper size, which are set in [1-2] and [1-3], are shown in the table below.
<Normal paper mode>
Plain paper Thick paper 1 Thick paper 2 Thick paper 3
Other 2 2 2 2
A3 2 2 2 2
A4 4 4 4 4
A4-R 3 3 3 3
A5 2 2 2 2
A5-R 4 4 4 4
A6-R 2 2 2 2
B4 3 9 9 9
B5 3 3 3 3
B5-R 2 2 2 2
FOLIO 2 2 2 2
LD 5 5 5 5
LG 9 9 9 9
LT 6 6 6 6
LT-R 3 3 3 3
ST 2 2 2 2
ST-R 3 3 3 3
COMP 2 2 2 2
13”LG 2 2 2 2
8.5”SG 2 2 2 2
8K 2 2 2 2
16K 2 2 2 2
16K-R 2 2 2 2
A3 wide 2 2 2 2