Toshiba E-STUDIO2008A - Page 641

8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 103
Jamming area Cover Sensor Test Mode/Input check
Paper path section Duplexing unit Registration sensor 03-[ALL]OFF/[4]/[B]
03-[COPY]ON/[5]/[H]
Transfer belt paper clinging
detection sensor
03-[ALL]OFF/[9]/[C]
2nd transfer side paper
clinging detection sensor
03-[ALL]OFF/[9]/[D]
1st drawer transport sensor 03-[SCAN]ON/[1]/[D]
Fuser Duplexing unit Fuser transport sensor 03-[ALL]OFF/[2]/[C]
03-[COPY]ON/[5]/[F]
Reverse path sensor 03-[ALL]OFF/[1]/[C]
03-[SCAN]ON/[3]/[E]
ADU Duplexing unit
Cover
Duplexing unit path exit sensor 03-[SCAN]ON/[3]/[G]
Duplexing unit path entrance
sensor
03-[SCAN]ON/[3]/[H]
Bypass unit Duplexing unit Bypass feed sensor 03-[SCAN]ON/[3]/[A]
Feeding area
(equipment)
Paper feed
cover
4th drawer transport sensor 03-[SCAN]ON/[1]/[A]
3rd drawer/tandem LCF
transport sensor
03-[SCAN]ON/[1]/[B]
2nd drawer transport sensor 03-[SCAN]ON/[1]/[C]
LCF LCF side cover Option LCF feed sensor 03-[SCAN]ON/[5]/[E]
Bridge unit Front cover Bridge unit path exit sensor 03-[ALL]OFF/[1]/[A]
03-[SCAN]ON/[3]/[C]
Bridge unit path entrance
sensor
03-[ALL]OFF/[1]/[B]
03-[SCAN]ON/[3]/[D]
Reverse sensor 03-[SCAN]ON/[3]/[F]
Reverse section stationary jam
detection sensor
03-[SCAN]ON/[4]/[A]
Upper exit section - Upper paper exit sensor 03-[ALL]OFF/[1]/[E]
03-[COPY]ON/[7]/[A]
Lower exit section - Lower paper exit sensor 03-[ALL]OFF/[4]/[C]
03-[COPY]ON/[5]/[G]
Reverse section Reverse path
cover
Reverse section paper
transport detection sensor
03-[COPY]ON/[8]/[F]
Finisher Finisher door Sensors in the finisher -