8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 107
[E724] Stop jam at the registration sensor
[E725] Stop jam at the read sensor
Classification Error content
RADF jam Stop jam at the registration sensor
Check item Measures
Registration roller Clean the registration roller if it is stained.
Registration sensor • Sensor check
(Perform the input check: 03-[FAX] ON[7]/[H])
• Connector check (CN74)
• Harness check
RADF board • Board check
• Connector check (CN74)
• Harness check
Parts to be replaced Remark
Registration sensor
RADF board
Registration roller Replace it if it is worn out.
Classification Error content
RADF jam Stop jam at the read sensor
Check item Measures
Read roller Clean the registration roller if it is stained.
Read sensor • Sensor check
(Perform the input check: 03-[FAX] ON[7]/[G])
• Connector check (CN75)
• Harness check
RADF board • Board check
• Connector check (CN75)
• Harness check
Parts to be replaced Remark
Read sensor
RADF board
Read roller Replace it if it is worn out.
To Next Page
Loading...
