Toshiba e-studio212 - Page 60

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 34
(3) Take off the equipment from the PFU.
 P.2-30 "[G-1] When PFP is not installed"
(4) Take off the PFP drawer.
Fig. 2-58
(5) Remove 1 screw and take off 1 fixing bracket
on the front left side.
Fig. 2-59
(6) Remove 1 screw and take off 1 fixing bracket
on the front right side.
Fig. 2-60
(7) Remove 1 screw and take off 1 fixing bracket
on the rear left side.
Fig. 2-61