2 Troubleshooting Procedures 2.14 Bluetooth Troubleshooting
2.14 Bluetooth Troubleshooting
To check if the Bluetooth is malfunctioning or not, follow the troubleshooting procedures
below as instructed.
Procedure 1: Transmitting-Receiving Check
Procedure 2: Antennas' Connection Check
Procedure 3: Replacement Check
Procedure 1 Transmitting-Receiving Check
Before starting the test, make sure the wireless communication switch is set in the ON
position.
Check 1 Execute Bluetooth test program to check the transmitting-receiving function of
Bluetooth. You will need a second computer that can communicate by Bluetooth.
Perform the test following the instructions described in Chapter 3.
If the computer passes the test, the function is correctly working. If the computer
does not pass the test, perform Procedure 2.
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL]

2-61
To Next Page
Loading...
Need help?
General