4.35 Wireless antennas 4 Replacement Procedures
4.35 Wireless antennas
Removing the wireless antennas
The following describes the procedure for removing the wireless antennas (See Figure 4-53
and 4-54).
1. Remove the following screw securing the hinge cap (R) and remove the hinge rear
cap (R) from the display assembly.
M2.0x4.0B FLAT BIND screw x1
M2.0x4.0B FLAT BIND
Hinge rear cap (R)
Figure 4-53 Removing the hinge rear cap (R)
4-82 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)
To Next Page
Loading...
