4.37 Display rear cover 4 Replacement Procedures
4.37 Display rear cover
Removing the display rear cover
The following describes the procedure for removing the display rear cover (See Figure 4-56).
1. Remove the following screws securing the display rear cover.
 M2.5x4.0B FLAT BIND screw x4
2. Remove the display rear cover from the cover assembly.
M2.5x4.0B FLAT BIND
Display rear cover
M2.5x4.0B FLAT BIND
Figure 4-56 Removing the display rear cover
Installing the display rear cover
The following describes the procedure for installing the display rear cover (See Figure 4-56).
1. Install the display rear cover to the cover assembly and secure it with the following
screws.
 M2.5x4.0B FLAT BIND screw x4
4-86 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)