Toshiba Qosmio G20 - H;W (Hardware) Initial Information Setting Tool; Heatrun Test Program

3 Tests and Diagnostics 3.1 The Diagnostic Test
3.1.2 H/W (Hardware) initial information setting tool
The H/W initial information setting tool consists of the following programs.
 Initial configuration
 Region write
 System configuration display
 E2PROM test (MAC/GUID/DMI)
You will need the following equipment to perform some of the programs.
 The Diagnostics Disk (Main T&D)
 A LAN wraparound connector (E2PROM test)
3.1.3 Heatrun test program
The heatrun test starts automatically after the selection.
You will need the following equipment to perform this program.
 The Diagnostics Disk (Main T&D)
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 3-3