4.7 Keyboard 4 Replacement Procedures
5. Lift the upper side of the keyboard and turn it face down on the palm rest.
6. Remove the following screws securing the keyboard support plate and remove the
keyboard support plate.
M2.5x8.0B FLAT BIND screw x2
7. Disconnect the keyboard cable from the connector CN3200 on the system board.
8. Remove the keyboard.
M2.5x8.0B FLAT BIND
Keyboard support plate
Keyboard cable
Keyboard
CN3200
Figure 4-10 Removing the keyboard
4-22 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)
To Next Page
Loading...
