4 Replacement Procedures 4.19 TV tuner module
Installing the TV tuner module
The following describes the procedure for installing the TV tuner module (See Figure 4-30).
1. Insert the TV tuner module into the connector CN2220 of the mini PCI slot
slantwise and press it to connect firmly.
2. Secure the TV tuner module with the following screws.
 M2.0x4.0C BIND screw x2
3. Connect the TV tuner harness to the connector PJ621 on the TV tuner module and
CN5661 on the system board.
4. Connect the TV antenna harness to the connector PJ601 on the TV tuner module.
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-51
To Next Page
Loading...
Need help?
General