4.27 PC card slot 4 Replacement Procedures
4-64 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)
Installing the PC card slot
The following describes the procedure for installing the PC card slot (See Figure 4-40).
1. Insert the terminal of the PC card slot into the connector CN2110 on the system board.
2. Secure the PC card slot with the following screws.
 M2.0x3.0B S-THIN FLAT BIND screw x2
 M2.0x8.0B BIND screw x2
To Next Page
Loading...
Need help?
General