4.38 Hinge 4 Replacement Procedures
4-88 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)
Installing the hinge
The following describes the procedure for installing the hinge (See Figure 4-57).
1. Install the hinge (R) to the cover assembly and secure it with the following screws.
M2.5x6.0B FLAT BIND screw x2
2. Install the hinge (L) to the cover assembly and secure it with the following screws.
M2.5x6.0C PSP TIGHT screw x2
To Next Page
Loading...
