J.3Operation of Independent utility Appendix J Maintenance of TOSHIBA RAID
Modify Array
This option changes the setting of array.
Change Parameter
Select [Change Parameter] in [Modify Array] menu. The following items can be set.
Table J-6
Item of array
Option Explanation
Write Cache Displays the setting of drive write cache. “Enable (use)” or
“Disable (not use)” is displayed. The default is “Enable (use)”.
Degrade Bootup Displays if boot OS or not when the array is degraded. “Yes” (Boot
up or “No” (Not boot up) is displayed. The default is “Yes”. This
option is displayed in RAID-1 (Mirroring).
MBR Protection Displays the setting of protection function of MBR (Master Boot
Record). “Enable” (Protect) or “Disable” (Not protect) can be
selected. The default is “Disable”.
S.M.A.R.T. Displays the setting of failure prediction function of drive.
“Enable” or “Disable” is displayed. The default is “Enable”.
J-20 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)
To Next Page
Loading...
