3.20 ONLY ONE TEST 3 Tests and Diagnostics
Subtest 1 Pressed key display
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to the key character that was pressed. Holding a key down enables
the auto-repeat function that causes the key’s display character to blink.
Press Del + Enter to end the test.
NOTE: The actual display may be different from the above image, according to the
model.
TECRA A9(S5/P5/S200) Maintenance Manual (960-633) [CONFIDENTIAL] 3-41
To Next Page
Loading...
