4 Replacement Procedures 4.5 HDD
4.5 HDD
CAUTION: When handling the HDD, do not press the top and bottom surface as shown by
the arrow. Hold it by the sides.
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-4 to 4-6.
1. Turn the computer upside down.
2. Remove the following screws securing the HDD cover.
3. Insert your finger into the slot and lift the HDD cover to remove.
• M2.5×6B FLAT HEAD screw ×2
HDD cover
M2.5×6B FLAT HEAD
Slot
Figure 4-4 Removing the HDD cover
4-12 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)
To Next Page
Loading...
