Toshiba TECRA A9 Series - Floppy Disk Drive Utilities; Function Description

3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics
TECRA A9(S5/P5/S200) Maintenance Manual (960-633) [CONFIDENTIAL] 3-53
3.24 Floppy Disk Drive Utilities
3.24.1 Function Description
This function formats the FDD, copies the floppy disk and displays the dump list for both the
FDD and HDD.
1. FORMAT
NOTE: This program is only for testing a floppy disk drive. It is different from the
Toshiba DOS FORMAT command.
This program can format a floppy disk in the following formats:
(a) 2DD: Double-sided, double-density, double-track, 96/135 TPI, MFM mode,
512 bytes, 9 sectors/track.
(b) 2HD: Double-sided, high-density, double-track, 96/135 TPI, MFM mode, 512
bytes, 18 sectors/track.
2. COPY
This program copies data from a source floppy disk to a target floppy disk.
3. DUMP
This program displays the contents of the floppy disk and the designated sectors of
the hard disk on the display.
4. HDD ID READ
This program reads the hard disk ID and displays hard disk information.